Sonax Car Cleaner Kit

SONAX Wheel Cleaner full effect:
Outstanding cleaning performance with complete surface safety, acid-free, easy to use.

Benefits:

• Incredibly fast and easy removal of brake dust and road soils.

• Non-corrosive formula provides complete surface safety to all wheel and wheel coating types, brake systems etc.

How to:
1. Spray evenly onto all wheel surfaces.

2. Depending upon soil level, allow to stand 3 to 5 minutes.  Cleaner turns red upon contact with iron particles. This is a normal chemical reaction and a sign of the pro-active cleaning effect.

3. Use a brush for extremely stubborn soils.

4. Rinse wheels thoroughly with a sharp stream of water from hose or pressure washer.

Benefits:

• Highly concentrated (1 bottle of concentrate yields over 50 gallons of car wash).
• Can be used diluted for regular wash or undiluted for dirt and grime, such as bird droppings or insect residues.

How To:
Diluted:
1. Shake well.

2. Remove measure cap on bottom of bottle.  Mix 20-30 ml of shampoo in wash bucket of warm water (see markings inside cap.)

3. Wash vehicle as usual.

4. Rinse with generous amounts of clear water and dry with towel or chamois.

Full Strength:
1. Apply shampoo to damp sponge and wipe onto stain (bird droppings, insect residue, etc.)

2. Allow to stand a minute, then rinse with clear water.

• Product removes soils (oil, diesel soot, road film, bug smear etc.) that impair driving visibility, especially in rainy weather.
• Unique squeeze-measure bottle treats more than 6 gallons of ordinary washer fluid

How To:
1. Loosen cap ¼ turn and squeeze bottle gently to fill top chamber fully. 

2. Add contents of 1-1/2 chambers to one gallon of ordinary washer fluid or to one gallon of plain water in non-frost areas. 

3. Add this mixture to car’s washer reservoir. If reservoir capacity is known, fill reservoir and add 1-1/2 chambers-full per gallon of capacity

• Removes swirls and fine scratches, dulling, oxidation etc.
• Buffs out extremely easily, developing an extremely high gloss.
• The car is polished and waxed in one easy step.
• For all types of paintwork, including metallic and new scratch-resistant finishes.

How To:
1. Wash vehicle. 

2. Making sure to do one section at a time, apply polish to a damp sponge or soft cloth and rub evenly back and forth on to dry or slightly damp paintwork. 

3. Buff to a brilliant shine using a soft cloth, micro fiber towel, etc

• Cleans and protects surfaces without leaving an oily look and feel behind.
• Not only does not attract dust like typical “protectants”, but actually works electrostatically to repel it!

How To:
1. Shake well.

2. Spray onto soft cloth or sponge and distribute evenly over surface.

3. Buff out with soft cloth.